Français
English
DISPLAY FOR ROTARY TORQUE SENSOR
DISP-60
o 1 torque sensor input 0...10 V
o 1 angle encoder input (A/B) or speed sensor input (A)
o 2 x digital input
o 2 x relay output
o USB interface (2.0 HID - Windows ® compatible software included)
o SD card slot (SD / SD HC)
o Acquisition interval: 10 ms...1 h
| DISP-60 | |
|---|---|
|
Input range (-)
|
0...10 V |
| Sensor excitation (-) | 12 VDC |
| Display (-) | 122 x 32 px |
|
Accuracy (% F.S.*)
|
<±0.05 |
|
A/D converter (-)
|
100 Hz |
| Internal resolution (-) | 2.5 mV / 12 bits |
|
Service temperature range (°C)
|
+5...+50 |
|
Power supply (-)
|
15...30 VDC |
| Consumption (-) | 200 mA |
| Qty of relay (-) | 2 |
| Relay type (-) | "Form A" (SPST) 1 A @ 125 VAC or 2 A @ 30 VDC |
| Dimensions (mm) | H 45 x W 92 x L 108 (front H 49 x W 96) |
| Weight (kg) | 0.33 |
|
IP rating (-)
|
IP40 |
* F.S. : Full Scale.
** : except thermal drifts.
Specifications subject to change without notice.
Associated electronics
EOT cranes recording and managing electronics. |
Conditionner-amplifier with 4..20 mA and 0..10 V output. |
| Crane overload protection electronics with 3 set-points and display on a front panel. |
| Conditioner-amplifier with 4..20 mA and -10..0..10 V output. |
| Crane overload protection electronics with 3 set-points and display for hoisting device (EOT cranes,..). |
| Dual independent process input meter. |
| Two channels crane overload protection electronics. |
| EOT crane overload protection electronics for hoisting device (EOT cranes, ...) |
| High-accuracy digital indicator for standard reference force transducer. |
| Very high accuracy digital indicator designed for weighing applications. |
| Smart junction box designed for parallel connecting of 2 to 4 load cells to an electronics and to ensure the monitoring of their correct functioning. |
| 4 channels digital indicator for 3115F-12390. |
| Hand-held indicator for transducer with mV/V output. |
| Junction boxes designed to connect several load cells in parallel to the same electronics with corner adjustment. |
| Electronics for weighing containers. |
| Display for running line tensiometer. |
| Analogue voltage and current signal converter with galvanic isolation. |
| Very high-accuracy digital indicator for standard reference force transducer. |
Crane overload protection electronics for the sum of several load cells / load pins |
| Large digital displays for distance reading |
| Crane overload protection electronics for 2 channels and their sum |
Crane overload protection electronics for 4 channels and their sum |
| Overload protection electronics for hoisting devices with certification for performance level PL d according to EN ISO 13849-1. |
| Converts the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB. |
| Radio transmitter for analogue signals (mV/V, 4..20 mA, 0..10 V). |
| Hand-held wireless indicator. |
| Radio receiver with analogue output (4..20 mA, 0..10 V). |
| Display for rotary torque sensor |
| Base stations designed to connect wireless load cell (WI-T24TR-xxx) |
| Base station designed to connect up to 8 wireless load cells (WI-T24TR-xxx) |
Crane overload protection electronics with 3 set-points and display for hazardous area. |
| Converts the signal from the Wheatstone bridge (mV/V) into a robust industrial standardised 4 to 20 mA signal. |
| Convert the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB. |
Universal large panel meters to be used with transducers and process signals. |
Panel meters with dual line display for Wheatstone bridge sensors |
Universal panel meters for using with load cells and process signals. |
Crane overload protection electronics with 3 set-points and display on a front panel. |
Crane overload protection electronics for the sum of several load cells / load pins |
Crane overload protection electronics with 3 set-points and display for hoisting device (EOT cranes,...). |