Français
English
HAND-HELD DISPLAYS FOR STRAIN-GAUGE-BASED TRANSDUCERS
INDI-PSD
o 7 digit LCD display
o High resolution
o Light (250 g)
o Dual range
o Large autonomy (450 h in power save mode)
o TEDS enabled
o RS-232 output (INDI-PSD232 only)
AVAILABLE OPTIONS
- CASE-PSD: leather case with shoulder strap and clear viewing- BATT-PSD: rechargeable batteries with charging unit (230 VAC)
| INDI-PSD | INDI-PSD232 | |
|---|---|---|
| Type (-) | Strain-gauge hand-held indicator | Strain-gauge hand-held indicator |
|
Input range (-)
|
± 5 mV/V | ± 5 mV/V |
| Sensor excitation (-) | 5 VDC (59 mA max.) | 5 VDC (59 mA max.) |
|
Non-linearity error (% F.S.*)
|
<± 0.005 | <± 0.005 |
| Display (-) | 7 digits LCD (8.8 mm) | 7 digits LCD (8.8 mm) |
|
A/D converter (-)
|
250 000 pts@1 Hz / 65 000 pts@10 Hz | 250 000 pts@1 Hz / 65 000 pts@10 Hz |
| Communication (-) | - | RS-232 |
|
Service temperature range (°C)
|
-10...+50 | -10...+50 |
|
Storage temperature range (°C)
|
-40...+65 | -40...+65 |
| Temperature coefficient of the sensitivity (% F.S.*/10°C) | <± 0.005 | <± 0.005 |
| Temperature coefficient of zero signal (% F.S.*/10°C) | <± 0.007 | <± 0.007 |
|
Power supply (-)
|
2 x AA alkaline batteries | 2 x AA alkaline batteries |
|
IP rating (-)
|
IP65 | IP65 |
* F.S. : Full Scale.
** : except thermal drifts.
Specifications subject to change without notice.
Associated electronics
EOT cranes recording and managing electronics. |
Conditionner-amplifier with 4..20 mA and 0..10 V output. |
| Crane overload protection electronics with 3 set-points and display on a front panel. |
| Conditioner-amplifier with 4..20 mA and -10..0..10 V output. |
| Crane overload protection electronics with 3 set-points and display for hoisting device (EOT cranes,..). |
| Dual independent process input meter. |
| Two channels crane overload protection electronics. |
| EOT crane overload protection electronics for hoisting device (EOT cranes, ...) |
| High-accuracy digital indicator for standard reference force transducer. |
| Very high accuracy digital indicator designed for weighing applications. |
| Smart junction box designed for parallel connecting of 2 to 4 load cells to an electronics and to ensure the monitoring of their correct functioning. |
| 4 channels digital indicator for 3115F-12390. |
| Hand-held indicator for transducer with mV/V output. |
| Junction boxes designed to connect several load cells in parallel to the same electronics with corner adjustment. |
| Electronics for weighing containers. |
| Display for running line tensiometer. |
| Analogue voltage and current signal converter with galvanic isolation. |
| Very high-accuracy digital indicator for standard reference force transducer. |
Crane overload protection electronics for the sum of several load cells / load pins |
| Large digital displays for distance reading |
| Crane overload protection electronics for 2 channels and their sum |
Crane overload protection electronics for 4 channels and their sum |
| Overload protection electronics for hoisting devices with certification for performance level PL d according to EN ISO 13849-1. |
| Converts the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB. |
| Radio transmitter for analogue signals (mV/V, 4..20 mA, 0..10 V). |
| Hand-held wireless indicator. |
| Radio receiver with analogue output (4..20 mA, 0..10 V). |
| Display for rotary torque sensor |
| Base stations designed to connect wireless load cell (WI-T24TR-xxx) |
| Base station designed to connect up to 8 wireless load cells (WI-T24TR-xxx) |
Crane overload protection electronics with 3 set-points and display for hazardous area. |
| Converts the signal from the Wheatstone bridge (mV/V) into a robust industrial standardised 4 to 20 mA signal. |
| Convert the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB. |
Universal large panel meters to be used with transducers and process signals. |
Panel meters with dual line display for Wheatstone bridge sensors |
Universal panel meters for using with load cells and process signals. |
Crane overload protection electronics with 3 set-points and display on a front panel. |
Crane overload protection electronics for the sum of several load cells / load pins |
Crane overload protection electronics with 3 set-points and display for hoisting device (EOT cranes,...). |