Français
English
SINGLE POINT LOAD CELL "OFF CENTER"
2022
Single point load cell specially designed for platform and hopper weighing.
o Designed for off-center load
o Maximum platform size: 800 x 800 mm
o Material: anodised aluminium alloy
o Protection class: IP64
o Easy to install
o Complies with OIML / R60 up to 3000 d for scales in class III according to EN 45501
o Cable length: 3 m (other lengths available on request)
AVAILABLE OPTIONS
| 0.03 % | C 3 | |
|---|---|---|
|
Accuracy class (-)
|
0.03 % F.S. | 3000 d OIML |
| Combined error (non-linearity + hysteresis) (% F.S.*) | <± 0.03 | <± 0.02 |
| Repeatability error (% F.S.*) | <± 0.015 | <± 0.01 |
|
Creep error over 30 min. (% F.S.*)
|
<± 0.025 | <± 0.02 |
|
Zero shift after loading (% F.S.*)
|
<± 0.0075 | <± 0.005 |
| Reference temperature (°C) | 23 | 23 |
| Compensated temperature range (°C) | -10...+45 | -10...+45 |
|
Service temperature range (°C)
|
-30...+70 | -30...+70 |
|
Storage temperature range (°C)
|
-50...+85 | -50...+85 |
| Temperature coefficient of the sensitivity (% F.S.*/10°C) | <± 0.015 | <± 0.009 |
| Temperature coefficient of zero signal (% F.S.*/10°C) | <± 0.023 | <± 0.013 |
|
Zero balance (mV/V)
|
± 0.02 | ± 0.02 |
|
Nominal sensitivity (mV/V)
|
2 | 2 |
| Sensitivity tolerance (%) | <± 0.2 | <± 0.1 |
| Input resistance (ohm(s)) | 350 ± 2 | 350 ± 2 |
| Output resistance (ohm(s)) | 350 ± 2 | 350 ± 2 |
| Insulation resistance (50 V) (Mohm(s)) | > 5000 | > 5000 |
|
Reference excitation voltage (VDC)
|
10 | 10 |
| Permissible nominal range of excitation voltage (VDC) | 3...12 | 3...12 |
| Safe load limit (% F.S.*) | 150 | 150 |
|
Breaking load (% F.S.*)
|
>300 | >300 |
|
Permissible dynamic loading (% F.S.*)
|
60 | 60 |
|
Static lateral force limit (% F.S.*)
|
100 | 100 |
* F.S. : Full Scale.
** : except thermal drifts.
Specifications subject to change without notice.
Datasheets
Manuals
Support
Associated electronics
Conditionner-amplifier with 4..20 mA and 0..10 V output. |
| Conditioner-amplifier with 4..20 mA and -10..0..10 V output. |
| Dual independent process input meter. |
| Very high accuracy digital indicator designed for weighing applications. |
| Smart junction box designed for parallel connecting of 2 to 4 load cells to an electronics and to ensure the monitoring of their correct functioning. |
| Hand-held indicator for transducer with mV/V output. |
| Junction boxes designed to connect several load cells in parallel to the same electronics with corner adjustment. |
| Analogue voltage and current signal converter with galvanic isolation. |
| Large digital displays for distance reading |
| Converts the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB. |
| Radio transmitter for analogue signals (mV/V, 4..20 mA, 0..10 V). |
| Hand-held wireless indicator. |
| Radio receiver with analogue output (4..20 mA, 0..10 V). |
| Base stations designed to connect wireless load cell (WI-T24TR-xxx) |
| Base station designed to connect up to 8 wireless load cells (WI-T24TR-xxx) |
| Converts the signal from the Wheatstone bridge (mV/V) into a robust industrial standardised 4 to 20 mA signal. |
| Convert the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB. |
Universal large panel meters to be used with transducers and process signals. |
Panel meters with dual line display for Wheatstone bridge sensors |
Universal panel meters for using with load cells and process signals. |