Français
English
INDICATOR FOR STANDARD REFERENCE FORCE TRANSDUCERS
INDI-ISO376
o High accuracy: 0.01%
o High resolution
o 6-wire connection
AVAILABLE OPTIONS
- acquisition and management software| INDI-ISO376 | |
|---|---|
| Type (-) | Strain-gauge input (mV/V) |
|
Accuracy class (-)
|
Classes 1, 05 and 00 compatible |
|
Input range (-)
|
± 3.3 mV/V |
| Sensor excitation (-) | 10 VDC |
|
Non-linearity error (% F.S.*)
|
<= 0.002 |
| Display (-) | 6 digits |
| Internal resolution (-) | 10 000 / 1 000 000 div. |
|
Service temperature range (°C)
|
-10...+50 |
|
Storage temperature range (°C)
|
-25...+85 |
| Temperature coefficient of the sensitivity (% F.S.*/10°C) | < 0.0015 |
| Temperature coefficient of zero signal (% F.S.*/10°C) | < 0.001 |
|
Power supply (-)
|
110 / 240 VAC |
|
IP rating (-)
|
IP54 |
* F.S. : Full Scale.
** : except thermal drifts.
Specifications subject to change without notice.
Associated electronics
EOT cranes recording and managing electronics. |
Conditionner-amplifier with 4..20 mA and 0..10 V output. |
| Crane overload protection electronics with 3 set-points and display on a front panel. |
| Conditioner-amplifier with 4..20 mA and -10..0..10 V output. |
| Crane overload protection electronics with 3 set-points and display for hoisting device (EOT cranes,..). |
| Dual independent process input meter. |
| Two channels crane overload protection electronics. |
| EOT crane overload protection electronics for hoisting device (EOT cranes, ...) |
| High-accuracy digital indicator for standard reference force transducer. |
| Very high accuracy digital indicator designed for weighing applications. |
| Smart junction box designed for parallel connecting of 2 to 4 load cells to an electronics and to ensure the monitoring of their correct functioning. |
| 4 channels digital indicator for 3115F-12390. |
| Hand-held indicator for transducer with mV/V output. |
| Junction boxes designed to connect several load cells in parallel to the same electronics with corner adjustment. |
| Electronics for weighing containers. |
| Display for running line tensiometer. |
| Analogue voltage and current signal converter with galvanic isolation. |
| Very high-accuracy digital indicator for standard reference force transducer. |
Crane overload protection electronics for the sum of several load cells / load pins |
| Large digital displays for distance reading |
| Crane overload protection electronics for 2 channels and their sum |
Crane overload protection electronics for 4 channels and their sum |
| Overload protection electronics for hoisting devices with certification for performance level PL d according to EN ISO 13849-1. |
| Converts the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB. |
| Radio transmitter for analogue signals (mV/V, 4..20 mA, 0..10 V). |
| Hand-held wireless indicator. |
| Radio receiver with analogue output (4..20 mA, 0..10 V). |
| Display for rotary torque sensor |
| Base stations designed to connect wireless load cell (WI-T24TR-xxx) |
| Base station designed to connect up to 8 wireless load cells (WI-T24TR-xxx) |
Crane overload protection electronics with 3 set-points and display for hazardous area. |
| Converts the signal from the Wheatstone bridge (mV/V) into a robust industrial standardised 4 to 20 mA signal. |
| Convert the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB. |
Universal large panel meters to be used with transducers and process signals. |
Panel meters with dual line display for Wheatstone bridge sensors |
Universal panel meters for using with load cells and process signals. |
Crane overload protection electronics with 3 set-points and display on a front panel. |
Crane overload protection electronics for the sum of several load cells / load pins |
Crane overload protection electronics with 3 set-points and display for hoisting device (EOT cranes,...). |